Marine and caravan LPG and methane gas detectors

Peel Marine Gas LPG Detectors are widely known and used in the Maritime industry, for their rugged and reliable design.  We have serviced the Marine Industry for many years and our units are only manufactured here in Australia.  We have a model to suit all applications.  Peel Electronics has actively worked with the Australian Standards Committee for LPG installation on Marine and Caravans.

Detector Applications

MD-200 LEL Combustible Gas Detector Sensor

MD-200

MD-100 LEL Combustible Gas Detector Sensor

MD-100

CO-100 Carbon Monoxide Gas Detector Sensor

CO-100

04-02-12Vb LEL Combustible Gas Detector Sensor

04-02-12Vb

MD-200 Series Combustible Gas Detectors

The MD-200 Series detectors are a marine & automotive based gas survey unit designed to run in conjunction with gas appliances for the detection of LPG/Propane Leaks.

(MD-220 Applies to AS5601.2, NSCV PartC-Section5-Subsection5C & ULS Section5-Part9.)

MD-220 Incorporates 2 x Combustible

Size in mm: 110L x 58W x 22

Gas Sensors, 1x 4M & 1x 6M sensor leads, Audible and Visual Alarms set points to 25% LEL of (Lower Explosive Limit, as per Australian Safety Standards) of Propane & Gas Lock off to shut down Gas supply in the event of an alarm

MD-200 Incorporates 1 x Combustible

Size in mm: 110L x 58W x 22

Gas Sensor, on 1x 4M sensor lead, Audible and Visual Alarms set points to 25% LEL(Lower Explosive Limit, as per Australian Safety Standards) of Propane & Gas Lock off to shut down Gas supply in the event of an alarm.

MD-100 Series Combustible Gas Detectors

The MD-100 Series LPG Gas Detectors are for the detection of LPG/Propane Methane Leaks, in many applications such as Boats and Caravans.  The units alarm visually and audibly, and are based on the same alarm set points of 25% LEL (Lower Explosive Limit, as per Australian Safety Standards) of Propane.

MD-120 Incorporates one remote sensor on a 4m lead, (adjustable on request)

And alarms visually and audibly in the event of an alarm.

The sensor is to be mounted in the area for detection of flammable/combustible gases.

MD-100 Incorporates one internal sensor

And alarms visually and audibly in the event of an alarm.

The detector is to be mounted in the area for detection of flammable/combustible gases. Note: checkout link to MD100 Gas Detector benefits over imported gas detectors in the Downloads Tab.

CO Detectors

CO-100 Carbon Monoxide Detector

Carbon monoxide (CO) safety monitoring suited for marine caravans, commercial and residential premises

  • Monitor CO levels in your caravan or boats cabin, home or office, CO is odourless and extremely dangerous and can be produced from appliances, such as stoves and heaters burning Fossil Fuels –  LPG (Propane) and Natural Gas (Methane), and exhaust fumes.
  • Monitor Diesel heaters CO levels, now fitted to many caravans and mobile homes.
  • Monitor CO levels from Household/Commercial heaters and stoves.
  • Are you in Compliance with Regulation (Marine) and Insurance (Marine and home)

SOLUTION:
Install an ‘Australian Made and Designed’ Peel Carbon Monoxide Detector for Safety, Regulation, Insurance and ‘peace of mind’, providing a safe environment  where Carbon Monoxide maybe present.

The Peel CO Detector

Model No. CO-100
Size in mm: 110L x 58W x 22/28D

The unit detects CO (Carbon Monoxide) Based on Standard UL2034.and alarms visually and audibly.

It has the provision to activate external alarms, strobe lights and blowers.

This unit can be ‘paired’ with our MD-200 Series LPG (Propane) detector in Marine use for complete safety.

Peel Gas Detectors utilize Figaro gas sensor technology for reliable operation, accuracy and traceability.

Available parts/spares for PEEL Marine Gas Detectors

MD-86 – Peel TGS813 long life Combustible Gas Sensor to replace Sensors on all MD Series Gas Detectors.

MD-L6  – 6Mtr Lead fitted with Sensor Socket & Sensor to suit the PEEL MD Series Detectors.

MD-SOL-8W  –   Australian Made Low Draw Solenoid, designed for Marine Use with encapsulation of wiring connections to coil, diode protection, and filter.

Peel MD-Series Combustible Gas Detectors, and CO-100 Series Carbon Monoxide Gas Detectors can work in Series from complete monitoring and controlling of gas supply in the event of an alarm.

Note the Peel MD-Series of LPG Detectors replaces the older versions, Model No.’s

O4-O2-12V

O4-O1-12VA

O4-OG-12V

04-02-12Vb LEL Combustible Gas Detector Sensor

Please Note:

Certain Applications using Peel Gas Detectors may involve potential risks of Death, Personal Injury, or severe property or environmental damage (“Critical Applications”). Peel Gas Detectors are not Authorized, or warranted to be suitable for use in Life-Support Devices or systems or other Critical Applications. Inclusion of Peel Gas Detectors is understood to be fully at the Customer’s Risk.